Re: CVBot - DEVIL 1.10 [Update 2.0] (11/07/2012)

nipunb Thu Jun 07, 2012 3:43 pm

<BQ> wrote:on the first start let the bot run without ImageDL

yes, i was also having trouble, when ImageDL starts loading, the bot gets an error, I just moved the ImageDL folder to somewhere else and ran bot and it worked perfectly, no error at all....... cheers

<BQ> Thu Jun 07, 2012 3:46 pm

nipunb wrote:
yes, i was also having trouble, when ImageDL starts loading, the bot gets an error, I just moved the ImageDL folder to somewhere else and ran bot and it worked perfectly, no error at all.......

surfingman Thu Jun 07, 2012 3:48 pm

<BQ> Thu Jun 07, 2012 3:53 pm

surfingman wrote:
I used it first time with ImageDL.
A few errors came up.
Copied my latest sqfiles from 1.7 because I didn´t like to enter all the things from Wall2, etc again.
Then I let it run a second time and everything was ok.

that works too

AQIROCK Thu Jun 07, 2012 3:54 pm

yes of course its work when remove imageDl guys but the most plugin i like is imageDL so in this update make me cant have imageDL so think its best for me to stick in 1.7 update xD

nipunb Thu Jun 07, 2012 3:57 pm

AQIROCK wrote:yes of course its work when remove imageDl guys but the most plugin i like is imageDL so in this update make me cant have imageDL so think its best for me to stick in 1.7 update xD

we just need to remove ImageDL plugin for first run only, once the bot have completed one cycle successfully, you can again use the ImageDL plugin....
I'm currently using it without any trouble.....

AQIROCK Thu Jun 07, 2012 4:09 pm

and for the next day doing the same again and again? just wonder hmm Sad

<BQ> Thu Jun 07, 2012 4:10 pm

AQIROCK wrote:and for the next day doing the same again and again? just wonder hmm

only on the first cycle, then put it back

AQIROCK Thu Jun 07, 2012 4:13 pm

ok I was finish my first cycle and already close my bot so can i put it without having any problem when run it? if yes i will try and see if the error come again

edit : ok mean its just for first run of update because there's no run yet so I have put imageDl back and its work fine. thanks for the clarification BQ!

Little Todd Thu Jun 07, 2012 10:22 pm

<BQ> wrote:
AQIROCK wrote:
BQ please check your update me and friends got this error when using the update 1.8 [You must be registered and logged in to see this link.] and its just fine with update 1.7. Please check for the error, I have try delete *.sqlite still same error given. Thanks!

on the first start let the bot run without ImageDL

The reason ImageDL has errors with version 1.8 is because the hook got changed.

ImageDL should run after the Profile gets saved to the database, not before.

Change line 3 in Hooks.php (ImageDL folder) from:

Code:: $this->AddHook('before_other_work', 'DownLoadImages');

To:

Code:: $this->AddHook('download_images', 'DownLoadImages');

This will solve any problems with ImageDL.

CangryMan Thu Jun 07, 2012 11:14 pm

Little Todd wrote:
<BQ> wrote:
AQIROCK wrote:
BQ please check your update me and friends got this error when using the update 1.8 [You must be registered and logged in to see this link.] and its just fine with update 1.7. Please check for the error, I have try delete *.sqlite still same error given. Thanks!

on the first start let the bot run without ImageDL

The reason ImageDL has errors with version 1.8 is because the hook got changed.

ImageDL should run after the Profile gets saved to the database, not before.

Change line 3 in Hooks.php (ImageDL folder) from:

Code:
$this->AddHook('before_other_work', 'DownLoadImages');
To:

Code:
$this->AddHook('download_images', 'DownLoadImages');
This will solve any problems with ImageDL.

thanks Little Todd worked perfectly for me!! cheers

gory1963 Fri Jun 08, 2012 3:52 am

CVBot - DEVIL 1.10 [Update 2.0] (11/07/2012) - Page 24 EYMKi

As I can do to activate the plugins? In the Plugins folder in c: program files / Cvbot-proyectdevil / plugins / buidings [for example], I can see that this active

CVBot - DEVIL 1.10 [Update 2.0] (11/07/2012) - Page 24 0s6j8

CVBot - DEVIL 1.10 [Update 2.0] (11/07/2012) - Page 24 0s6j8

When you get to work I can not see the button on the taskbar Help! thanks

Little Todd Fri Jun 08, 2012 3:59 am

gory1963 wrote:As I can do to activate the plugins? In the Plugins folder in c: program files / Cvbot-proyectdevil / plugins / buidings [for example], I can see that this active

When you get to work I can not see the button on the taskbar Help! thanks

Run the bot once, and the plugin tabs should show.

Once ran, use the Plugin Manager to activate any plugins that are not active.

Lomen Fri Jun 08, 2012 4:03 am

Building plugs in this new update are updated as well?

Little Todd Fri Jun 08, 2012 4:06 am

Lomen wrote:Building plugs in this new update are updated as well?

Full releases always include the latest versions of the plugins.

gory1963 Fri Jun 08, 2012 4:34 am

Little Todd wrote:
gory1963 wrote:As I can do to activate the plugins? In the Plugins folder in c: program files / Cvbot-proyectdevil / plugins / buidings [for example], I can see that this active

When you get to work I can not see the button on the taskbar Help! thanks

Run the bot once, and the plugin tabs should show.

Once ran, use the Plugin Manager to activate any plugins that are not active.

It usually happens as you say, but I run several times, allowing complete its tasks, but the hits do not appear.
Remove and clean all traces of the previous installation, and reinstall on another route I did, and as it happens, the bot stops, but the plugins do not appear ..???

AQIROCK Fri Jun 08, 2012 7:27 am

seem like there's no running in your bot picture is it just plugin or all thing including the log not appear to you? LOL if bot are just empty as picture try run as administrator

AQIROCK Fri Jun 08, 2012 7:32 am

Little Todd wrote:

on the first start let the bot run without ImageDL

The reason ImageDL has errors with version 1.8 is because the hook got changed.

ImageDL should run after the Profile gets saved to the database, not before.

Change line 3 in Hooks.php (ImageDL folder) from:

Code:
$this->AddHook('before_other_work', 'DownLoadImages');
To:

Code:
$this->AddHook('download_images', 'DownLoadImages');
This will solve any problems with ImageDL.

thanks todd and its work great!

gory1963 Fri Jun 08, 2012 12:23 pm

AQIROCK wrote:seem like there's no running in your bot picture is it just plugin or all thing including the log not appear to you? LOL if bot are just empty as picture try run as administrator

Hi thanks for replying, the plugins are active, starting the bot all plugins do their job, then CVbot stops but does not appear in the taskbar, only present the wikia. Try moving all plugins * no * user within the Plugins folder in an attempt to see if they appear in the taskbar, but had no success. I can do to correct the error?

demian.kinley Fri Jun 08, 2012 10:56 pm

please start bot as administrator, i hope you can do this !!

take a look , or ask some friends, how to do that, please !

mns Sat Jun 09, 2012 9:19 pm

multi plugin not exit in CVBot - DEVIL 1.10 [Update 1.8] (07/06/2012)
is it removed?

Little Todd Sat Jun 09, 2012 11:58 pm

mns wrote:multi plugin not exit in CVBot - DEVIL 1.10 [Update 1.8] (07/06/2012)
is it removed?

It's in the ++unUsed++ folder.

Move it to the Plugins folder. You should then be able to activate it.

What do you use the multi plugin for, If I might ask?

gory1963 Sun Jun 10, 2012 12:06 am

demian.kinley wrote:
please start bot as administrator, i hope you can do this !!

take a look , or ask some friends, how to do that, please !

What started as administrator and still nothing, no solution found

gory1963 Sun Jun 10, 2012 12:11 am

Little Todd wrote:
mns wrote:multi plugin not exit in CVBot - DEVIL 1.10 [Update 1.8] (07/06/2012)
is it removed?

It's in the ++unUsed++ folder.

Move it to the Plugins folder. You should then be able to activate it.

What do you use the multi plugin for, If I might ask?

Hi this I did as you say, try removing some plugins, folder + + unused + + => Plugins and revez Plugins => + + unused + +, but after starting the bot as admin, and this end of the initial charge, not see anything, it only remains visible Wikia.

mns Sun Jun 10, 2012 12:39 pm

Little Todd wrote:
mns wrote:multi plugin not exit in CVBot - DEVIL 1.10 [Update 1.8] (07/06/2012)
is it removed?

It's in the ++unUsed++ folder.

Move it to the Plugins folder. You should then be able to activate it.

What do you use the multi plugin for, If I might ask?

trade in collection is it still work ?

Sponsored content